Clearance Inspection - Honda Prelude 1993 Service Manual

Gountershaft
Clearance Inspection
l, Measure the clearance between the 1st gear and
thrust washer.
Standard:
0.04 - 0.10 mm
{0.002 - 0.0O'l in}
Servica Limit: 0.18 mm 10.007 inl
2. lf the clearance exceeds the service limit. select the
appropriate thrust washer for the correct clearance
from the chart below,
THRUST WASHER
THBUST WASHER
Part Number
Thicknaes
23921 - PG1 - 000
1 . 9 6 m m ( 0 . 0 7 7 1 i n )
B
2 3 9 2 2 - P G 1 - 0 0 0
1.99 mm (0.0783 in)
2 3 9 2 3 - P G 1 - 0 0 0
2.02 mm (0.0795 in)
D 2 3 9 2 4 - P G 1 - 0 0 0
2.05 mm (0.0807 in)
E
23925 - PGl -000
2.08 mm 10.0819 inl
13-24
3. Measure the clearance betwoen the 2nd gear and
3rd gear.
Strndlrd: 0.0,1- 0.10 mm
{0.002 - 0.00il in)
Sorvico Limil:0.18 mm (0.007 in)
4. lf the clearance excesda the service limit, select the
appropriate space. collar for the correct clearance
from the chart below.
SPACER COLLAR
Prrt Numbcr
Thickn..s
A 23917-P21-O10
29.02 - 29.04 mm
( 1 . 1 4 2 5 - 1 . 1 4 3 3 i n )
B 2 3 9 1 8 - P 2 ' r - 0 1 0
29.07 - 29.09 mm
( 1 . 1 4 4 5 - 1 . 1 4 5 3 i n )