Reverse Shift Arm, Reverse Shift Fork Clearance Inspection - Honda Acura NSX 1991 Service Manual

Reverse Shift Arm., Reverse Shift Fork
-Clearance Inspection
1. Measure the clearance between the reverse shift
arm and the 5th/reverse
0.05-0.30
Standard:
(0.0020-0.0118
Service Limit: 0.5 mm (0.020 in)
REVERSE SHIFT ARM
2. If the clearance exceeds the service limit, measure
the width of the groove in the reverse shift arm.
Standard: 7.05-7.20 mm (O-2776-0.2835 in.)
If the width of the groove exceeds the standard,
replace the reverse shift arm with a new one.
If the width of the groove is within the standard,
replace the Sth/reverse
shift piece.
mm
in)
shift piece with a new one.
3. Measure the clearance between the reverse shift
arm and reverse shift fork.
Standard: 0.05-0.35
(0.0020-0.0138
Service Limit: 0.5 mm (0.020 in.)
REVERSE SHIFT ARM
I
REVERSE dHlFT F O R K
4. If the clearance exceeds the service limit, measure
the width of the reverse shift arm.
Standard: 12.8-13.0 mm (0.5039-0.512 in.)
If the width exceeds the standard, replace the
reverse shift arm with a new one.
If the width is within the standard, replace the
reverse shift fork with a new one.
mm
in.)