Clutch Disassembly - Honda 2004 Odyssey Service Manual

Clutch Disassembly

Special Tools Required
• Clutch spring compressor attachment
07LAE-PX40100
• Clutch spring compressor attachment
07HAE-PL50101
• Clutch spring compressor bolt assembly
07GAE-PG40200 or 07GAE-PG4020A
1. Remove the snap ring (A), then remove the clutch
end plate, the clutch discs, and the plates with a
screwdriver (B).
B
2. Remove the disc spring (A) from the 1st, 3rd, and
4th clutches.
NOTE: The 2nd clutch does not have a disc spring.
3. Install the special tools on the clutch assembly.
A
07GAE-PG40200 or
07GAE-PG4020A
4. Be sure the special tool (A) is adjusted to have full
contact with the spring retainer (B) on the 3rd and
4th clutches.
A
07LAE-PX40100
07LAE-PX40100 or
07HAE-PL50101
A
B
(cont'd)
14-217