Checking Commonly Used Parameters - YASKAWA GA700 Technical Manual

3.6 Keypad Operation
5.
Press or
6.
Press or
7.
Press or
• Press
• Press
8.
Press to confirm changes.
9.
Continue to set parameters or press
This completes the parameter changes.
◆

Checking Commonly Used Parameters

Displays the parameter set in A2-01 to A2-32 [User Parameter 1 to User Parameter 32]. In addition, not only is it
possible to check the parameters that have been set, but further changes in their setting values can be made as
well.
Note:
Always displays A1-06 [Application Selection] at the top of the list. The settings for A2-01 to A2-32 vary depending on the value
selected for A1-06 making it easy to set and reference the required parameter settings.
1.
Press (Home) to display the HOME screen.
Note:
• [Home] appears in the upper right hand corner of the screen when in HOME mode.
• If [Home] is not displayed for
130
to select [C1 Accel & Decel Time], and press
to select C1-01, and press
to select a specific digit. Press
[Default] to reset the parameters to the factory default.
[Min/Max] will alternate between the minimum value and maximum value.
, press
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
.
or select the desired number.
(Back) to return to the HOME screen.
(Back), and then press
.
to display [Home].