F5: Digital Output Option - YASKAWA GA700 Technical Manual

■
F4-07: Terminal V1 Signal Level
No.
Name
(Hex.)
F4-07 Terminal V1 Signal
Level
(0397)
0 : 0 to 10 V
1 : -10 to 10 V
■
F4-08: Terminal V2 Signal Level
No.
Name
(Hex.)
F4-08 Terminal V2 Signal
Level
(0398)
0 : 0 to 10 V
1 : -10 to 10 V
◆

F5: Digital Output Option

F5 parameters are used to set output mode and function of output signals when using the digital output option
card DO-A3.
When the DO-A3 card is installed to the drive, isolated digital signals used to monitor the drive operation status
can be output.
• 6 points of photocoupler output (48 V, 50 mA or less)
• 2 points of relay contact output (250 Vac, 30 Vdc: 1 A or less)
Refer to the instruction manual packaged with the DO-A3 card for more information on installing, wiring, and
setting the DO-A3 card.
■
Output Mode Selection via Parameters
Signal output from the DO-A3 card can be set as follows via F5-09 [DO-A3 Output Mode Selection].
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
V/f CL-V/f OLV CLV AOLV
Selects the level of signals output from the MFAO terminal V1.
V/f CL-V/f OLV CLV AOLV
Selects the level of signals output from the MFAO terminal V2.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
11.7 F: Options
Default Setting
(Range)
0
(0, 1)
Default Setting
(Range)
0
(0, 1)
11
727