3.6 Keypad Operation
Note:
• Always stop the motor before making a backup of the parameters.
• While a backup is being made, the drive will not accept any Run commands.
1.
Press
(Home) to display the HOME screen.
Note:
• [Home] appears in the upper right hand corner of the screen when in HOME mode.
• If [Home] is not displayed for
2.
Press
(Menu).
3.
Press
or
4.
Press
or
5.
Press
or
6.
Press
or
"End" appears on the keypad, signifying that the backup completed successfully.
◆
Writing Backed-Up Parameters to the Drive
Parameters backed up on the keypad can be written to another drive.
Note:
• Always stop the drive before starting the restoration procedure for parameter backups.
• The drive does not accept Run commands while restoring parameters.
132
, press
(Back), and then press
to select [Parameter Backup], and press
to select the items to be backed up, and press
to select [Backup (Drive → Keypad)], and press
to select the area targeted for storage, and press
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
to display [Home].
.
.
.
.