Show Monitor As Analog Meter - YASKAWA GA700 Technical Manual

3.6 Keypad Operation
3.
Press or
4.
Press or
5.
Press .
6.
Press or
When the U Parameters have been expressed as Ux-xx make settings for the "x-xx" portion. For example,
if U1-01 is to be monitored, set it to "101" as shown in the following.
This completes the settings procedure.
◆

Show Monitor as Analog Meter

The following explains how to display a monitor as an analog meter.
1.
Press (Home) to display the HOME screen.
Note:
• [Home] appears in the upper right hand corner of the screen when in HOME mode.
• If [Home] is not displayed for
2.
Press (Menu).
128
to select [Display Monitor], and press
to select [Display Analog Meter], and press
to select the monitor number to register, and press
, press (Back), and then press
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
.
(Setup).
.
to display [Home].