YASKAWA GA700 Technical Manual page 794

11.8 H: Terminal Functions
■
1C: Motor 2 Selection
Setting Function
1C Motor 2 Selection
ON : Motor 2 Selection
OFF : Motor 1 Selection
■
1D: During Regeneration
Setting Function
1D During Regeneration
ON : Motor is regenerating.
OFF : Motor is operating or stopped.
■
1E: Restart Enabled
Setting Function
1E Restart Enabled
The terminal turns off when a fault is automatically reset by the Auto Restart function. The terminal turns off
when the Auto Restart function detects the fault again since Auto Restart function cannot function any longer due
to number of attempts set with L5-01 [Number of Auto Restart Attempts] being reached.
Note:
Refer to "L5: Fault Restart" for more information.
■
1F: Motor Overload Alarm (oL1)
Setting Function
1F Motor Overload
Alarm (oL1)
Note:
Refer to "L1-01: Motor Overload Protection Select" for more information.
■
20: Drive Overheat Pre-Alarm (oH)
Setting Function
20 Drive Overheat Pre-
Alarm (oH)
Note:
Refer to "L8-02: Overheat Alarm Level" for more information.
■
21: EDM
Setting Function
21 EDM
Note:
EDM = External Device Monitor
ON : Safety stop state
Both terminal H1-HC and H2-HC have been turned off, or released (safety stop state).
OFF : Safety circuit fault or RUN/READY
794
V/f CL-V/f OLV CLV AOLV
The terminal turns on when motor 2 is selected.
V/f CL-V/f OLV CLV AOLV
The terminal turns on when the motor is regenerating.
V/f CL-V/f OLV CLV AOLV
The terminal turns on when a fault that can be restarted occurs and the Auto Restart function is
attempting to operate.
V/f CL-V/f OLV CLV AOLV
The terminal turns on when the electronic thermal protector value of the motor overload protective
function reaches at least 90% of the detection level.
V/f CL-V/f OLV CLV AOLV
The terminal turns on when the drive heatsink temperature reaches the level set with L8-02
[Overheat Alarm Level].
V/f CL-V/f OLV CLV AOLV
The terminal turns on (safety stop state) when the safety circuit and safety diagnosis circuit is not
experiencing a failure and when both terminals H1-HC and H2-HC are off (released).
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV