Keypad Operation; Use The Home Screen - YASKAWA GA700 Technical Manual

3.6 Keypad Operation

3.6

Keypad Operation

◆

Use the HOME Screen

The functions that can be controlled from the HOME screen and the content that is displayed are explained in the
following.
■
View Monitors Shown in Home Screen
A monitor is shown in the data display area of the HOME screen, as shown in the following.
• The monitor that is displayed can be changed by changing the setting for o1-40 [Home display selection].
• When "Custom Monitor" is set for o1-40 [Home display selection], and there are a multiple number of screens,
use or to switch among screens.
■
JOG Operation
Press so the
and the motor stops.
■
Change Motor between Forward/Reverse Run
The direction of motor rotation can be changed when running the drive from the keypad. Press
is lit.
Press (FWD/REV) to toggle the direction of motor rotation between forward and reverse.
■
Show the Standard Monitor
Press to display the standard monitor (Ux-xx). Press
Note:
When a fault, minor fault, or an error occurs,
standard monitor (Ux-xx) is displayed.
■
Change the Frequency Reference Value
1. Press to access the screen for changing the frequency.
2. Press or to select the digit, then use
3. Press to confirm the changes in the value.
Note:
This function cannot be used when the keypad is not set to be the Run command source (REMOTE), or when U1-01 [Freq Reference] is
not displayed in the HOME screen.
122
is lit. The motor will rotate while
is pressed to display the content of the fault. If the
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
(JOG) is pressed. Cease from pressing the key,
(HOME) to return to the HOME screen.
or to change the value.
so the
is then pressed again, the