YASKAWA GA700 Technical Manual page 797

The Run command source or frequency reference source is an external source selected with b1-01 [Frequency
Reference Selection 1], b1-02 [Run Command Selection 1], b1-15 [Frequency Reference Selection 2], or b1-16
[Run Command Selection 2].
■
3D: During Speed Search
Setting Function
3D During Speed Search
Note:
Refer to "b3: Speed Search" for more information.
■
3E: PID Feedback Low
Setting Function
3E PID Feedback Low
FbL [PID Feedback Loss] is detected when the PID feedback value falls below the setting value of b5-13 [PID
Feedback Loss Detection Lvl] for a time exceeding the setting value of b5-14 [PID Feedback Loss Detection
Time].
Note:
Refer to "PID Feedback Loss Detection" for more information.
■
3F: PID Feedback High
Setting Function
3F PID Feedback High
FbH [Excessive PID Feedback] is detected when the PID feedback value exceeds the setting value of b5-36 [PID
Feedback High Detection Lvl] for a time exceeding the setting value of b5-37 [PID Feedback High Detection
Time].
Note:
Refer to "PID Feedback Loss Detection" for more information.
■
4A: During KEB Ride-Thru
Setting Function
4A During KEB Ride-
Thru
Note:
Refer to "KEB Ride-Thru function" for more information.
■
4B: During Short Circuit Braking
Setting Function
4B During Short Circuit
Braking
Note:
• This function is enabled only when using PM motors while A1-02 = 8 [Control Method Selection = EZ Open Loop Vector Control].
• Refer to "b2: DC Circuit Braking" for more information.
■
4C: During Fast Stop
Setting Function
4C During Fast Stop
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
V/f CL-V/f OLV CLV AOLV
The terminal turns on when speed search is executing.
V/f CL-V/f OLV CLV AOLV
The terminal turns on when FbL [PID Feedback Loss] is detected.
V/f CL-V/f OLV CLV AOLV
The terminal turns on when FbH [Excessive PID Feedback] is detected.
V/f CL-V/f OLV CLV AOLV
The terminal turns on while the KEB Ride-Thru function is being executed.
V/f CL-V/f OLV CLV AOLV
The terminal turns on during Short Circuit Braking.
V/f CL-V/f OLV CLV AOLV
The terminal turns on when the fast stop is active.
11.8 H: Terminal Functions
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
11
797