YASKAWA GA700 Technical Manual page 694

11.6 E: Motor Parameters
HD: 2004 - 2021, 4002 - 4012
ND: 2004 - 2018, 4002 - 4009
A : High Start Trq_60Hz base_125% V
This pattern is used when moderate torque is required during startup.
Select this pattern only in the following circumstances.
• Wiring distance between the drive and motor is at least 150 m.
• An AC reactor is connected to the drive output.
Note:
The voltage values in the figure represent those when using 200 V class drives. Double the values for 400 V class drives.
HD: 2004 - 2021, 4002 - 4012
ND: 2004 - 2018, 4002 - 4009
B : High Start Trq_60Hz base_165% V
This pattern is used when strong torque is required during startup.
Select this pattern only in the following circumstances.
• Wiring distance between the drive and motor is at least 150 m.
• An AC reactor is connected to the drive output.
Note:
The voltage values in the figure represent those when using 200 V class drives. Double the values for 400 V class drives.
HD: 2004 - 2021, 4002 - 4012
ND: 2004 - 2018, 4002 - 4009
C : High Freq_60Hz base_90Hz max
This pattern is used to rotate motors at greater than 60 Hz. Output voltage is constant when operating at greater
than 60 Hz.
Note:
The voltage values in the figure represent those when using 200 V class drives. Double the values for 400 V class drives.
694
HD: 2030 - 2211, 4018 - 4103
ND: 2021 - 2169, 4012 - 4089
HD: 2030 - 2211, 4018 - 4103
ND: 2021 - 2169, 4012 - 4089
HD: 2030 - 2211, 4018 - 4103
ND: 2021 - 2169, 4012 - 4089
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
HD: 2257 - 2415, 4140 - 4675
ND: 2211 - 2415, 4103 - 4675
HD: 2257 - 2415, 4140 - 4675
ND: 2211 - 2415, 4103 - 4675
HD: 2257 - 2415, 4140 - 4675
ND: 2211 - 2415, 4103 - 4675