YASKAWA GA700 Technical Manual page 822

11.8 H: Terminal Functions
■
H6-05: Pulse Train Input Filter Time
No.
Name
(Hex.)
H6-05 Pulse Train Input
Filter Time
(0430)
RUN
■
H6-06: Pulse Train Monitor Selection
No.
Name
(Hex.)
H6-06 Pulse Train Monitor
Selection
(0431)
RUN
Note:
Set this parameter to 000 or 031 when the terminal MP is not used or used in through mode.
When using the pulse train monitor, connect peripheral devices in accordance with the following load conditions.
Incorrect connections may cause characteristic insufficiency or mechanical damage.
• Use the pulse train monitor as sourcing output
Output Voltage
• Using the pulse train monitor as the sinking input
External power supply (V)
Sinking current (mA)
■
H6-07: Pulse Train Monitor Scaling
No.
Name
(Hex.)
H6-07 Pulse Train Monitor
Scaling
(0432)
RUN
822
V/f CL-V/f OLV
Sets the primary delay filter time constant for the pulse train input.
V/f CL-V/f OLV
Selects a function for the pulse train monitor output terminal MP. Inputs the
"x-xx" portion of the Ux-xx parameter to be monitored.
VRL(V)
5 V or higher
8 V or higher
10 V or higher
Figure 11.113 Circuit Diagram When Used as the Sourcing Output
Figure 11.114 Circuit Diagram When Used as the Sinking Input
V/f CL-V/f OLV
Sets the frequency of the pulse train output signal used when the item
selected with H6-06 [Pulse Train Monitor Selection] is output at 100%.
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
Description
CLV AOLV OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
CLV AOLV OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
12 VDC ± 10%, 15 VDC ± 10%
Description
CLV AOLV OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
(0.00 – 2.00 s)
(000, 031, 101, 102,
105, 116, 501, 502,
and 801 through 809)
Load impedance (kΩ)
1.5 kΩ or greater
4.0 kΩ or greater
10 kΩ or greater
16 mA or less
(0 - 32000 Hz)
Default
(Range)
0.10 s
Default
(Range)
102
Default
(Range)
1440 Hz