Remove Or Install The Keypad; Remove The Keypad; Reattach The Keypad - YASKAWA GA700 Technical Manual

2.6 Remove or Install the Keypad

2.6

Remove or Install the Keypad

NOTICE: Be sure to remove the keypad prior to opening or reattaching the front cover. Firmly fasten the front cover back into
place before reattaching the keypad. Leaving the keypad plugged into the drive when removing the front cover can result in
erroneous operation caused by a poor connection.
◆

Remove the Keypad

1.
While pressing on the hook located on the top of the keypad, pull the keypad forward to remove it from the
drive.
2.
Pull out the keypad connector and place it in the holder.
Note:
Insert the keypad connector in the direction of the hook.
A - Holder
B - Hook
◆

Reattach the Keypad

Reconnect the keypad connector. Next, press gently on the top of the keypad until the hook clicks into place.
36
Figure 2.5 Remove the Keypad
Figure 2.6 Place the Keypad Connector in the Holder
Figure 2.7 Reattach the Keypad
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
C - Keypad connector