Control Circuit Wiring; Control Circuit Connection Diagram - YASKAWA GA700 Technical Manual

High performance type; 200 v class: 0.4 to 110 kw; 400 v class: 0.4 to 355 kw

Hide thumbs Also See for GA700:

Table of Contents

Control Circuit Wiring

This section explains the wiring for the control circuit.

Wire the control circuit as shown in the following figure.

Supplying power to the control circuit separately from the main circuit requires a 24 V power supply be

input to terminal PS-AC.

Install a wire jumper between terminals SC-SP-SN to select the type of the power supply of MFDI (sinking/

sourcing mode or internal/external power supply). Do not short terminals SP and SN. Failure to comply will

damage the drive.

YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual

Figure 2.43 Control Circuit Connection Diagram