YASKAWA GA700 Technical Manual page 285

Code Name
oFb00 Not supported
Note:
• Perform Fault Reset to clear the fault.
• Fault tracing cannot be executed.
Code Name
oFb01 Connection Error
Note:
Perform Fault Reset to clear the fault.
Code Name
oFb02 DuplicateOptions
Note:
Perform Fault Reset to clear the fault.
Code Name
oFb03 to Option card error occurred
oFb11 at Option Port CN5-B
Note:
Perform Fault Reset to clear the fault.
Code Name
oFb12 to Option card error occurred
oFb17 at Option Port CN5-B
Note:
Perform Fault Reset to clear the fault.
Code Name
oFC00 Not supported
Note:
• Perform Fault Reset to clear the fault.
• Fault tracing cannot be executed.
Code Name
oFC01 Connection Error
Note:
Perform Fault Reset to clear the fault.
Code Name
oFC02 DuplicateOptions
Note:
Perform Fault Reset to clear the fault.
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
Cause
An option card that is not compatible
with the CN5-B connector was
connected.
Cause
The option card connected to the CN5-B
connector was changed during
operation.
Cause
The same option card or the same type
of option card has been connected to the
CN5-A, B, and C connectors.
Cause
A fault occurred in the option card.
Cause
A fault occurred in the option card.
Cause
An option card that is not compatible
with the CN5-C connector was
connected.
Cause
The option card connected to the CN5-C
connector was changed during
operation.
Cause
The same option card or the same type
of option card has been connected to the
CN5-A, B, and C connectors.
Possible Solution
Connect the option card to the correct connector.
Note:
The option cards that can be connected to the
CN5-B connector are the DO-A3, AO-A3, PG-
B3, and PG-X3. Use the CN5-C connector
when mounting only one PG option card.
Possible Solution
1. De-energize the drive.
2. Properly connect the option card to the
connector on the drive, referring to the manual
for the option card.
Possible Solution
Connect the option card to the correct connector.
Possible Solution
1. De-energize the drive.
2. Check whether the option card is connected
securely to the connector.
3. If the problem continues, replace the option
card.
Possible Solution
1. De-energize the drive.
2. Check whether the option card is connected
securely to the connector.
3. If the problem continues, replace the option
card.
Possible Solution
Connect the option card to the correct connector.
Note:
AI-A3, DI-D3, and communication option cards
cannot be connected to the CN5-C connector.
Possible Solution
1. De-energize the drive.
2. Properly connect the option card to the
connector on the drive, referring to the manual
for the option card.
Possible Solution
Connect the option card to the correct connector.
6.4 Fault
6
285