YASKAWA GA700 Technical Manual page 799

ON : The Run command turns on and the magnetic contactor on the input side turns off.
OFF : The Run command turns off and the drive stops operating. Then, the magnetic contactor
on the input side turns off after the time set with b8-51 [Standby Mode Wait Time] elapses.
■
66: Comparator1
Setting Function
66 Comparator1
A - H2-24
[Comparator 1 On-Delay Time]
Note:
The monitors configured with H2-20 are compared as absolute values.
■
67: Comparator2
Setting Function
67 Comparator2
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
V/f CL-V/f OLV CLV AOLV
The monitor value configured with H2-20 is on while within range of the time configured with H2-
24 and the values of H2-21 and H2-22 are within range.
Figure 11.97 Comparator 1 Output Time Chart
V/f CL-V/f OLV CLV AOLV
The monitor value configured with H2-26 is on while within range of the time configured with H2-
30 and the values of H2-27 and H2-28 are within range.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
B - H2-25
[Comparator 1 Off-Delay Time]
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
11.8 H: Terminal Functions
11
799