Display Fault History - YASKAWA GA700 Technical Manual

5.
Press .
6.
Press or
7.
Press (Default).
8.
Press .
The parameters are returned to their default settings.
◆

Display Fault History

The fault code and date and time of faults that occurred in the past can be checked. Up to a maximum of 10 past
fault events can be checked.
Note:
• To keep a record of the date and time of fault events, the date and time need to be set beforehand.
• If the clock-use battery has not been installed in the keypad, the date and time will need to be set when the drive is energized again
after it was de-energized.
1.
Press (Home) to display the HOME screen.
Note:
• [Home] appears in the upper right hand corner of the screen when in HOME mode.
• If [Home] is not displayed for
2.
Press (Menu).
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
to select the parameters to be returned to their default settings, and press
10:00 am FWD
Acceleration Time 1
C1-01
0010.0 sec
Default : 10.0sec
Range : 0.0~6000.0
Back Default Min/Max
, press (Back), and then press
Parameters
to display [Home].
3.6 Keypad Operation
.
137
3