YASKAWA GA700 Technical Manual page 591

■
A2-01 to A2-32: User Parameters 1 to 32
No.
Name
(Hex.)
A2-01 to A2- User Parameters 1 to
32 32
(0106 - 0125)
Note:
• Settings for A2-01 to A2-32 vary depending on the value selected for A1-06 [Application Preset].
• Users are only able to access parameters A2-01 to A2-32 when A1-01 = 1 [Access Level Selection = User Parameters] is set.
The drive registers the following parameters to A2-01 to A2-32.
• The drive registers up to 32 parameters selected by the user.
Note:
Set A1-01 = 2 [Advanced Level] and register any parameter.
• The drive automatically registers any parameters that are changed to A2-17 to A2-32.
Note:
Set A2-33 = 1 [User Parameter Auto Selection = Enabled].
■
A2-33: User Parameter Auto Selection
No.
Name
(Hex.)
A2-33 User Parameter Auto
Selection
(0126)
0 : Disabled
The user manually registers parameters to the User Parameters.
1 : Enabled
The drive automatically registers any parameters that are changed to A2-17 to A2-32. The drive automatically
saves the most recently changed parameter to A2-17, and saves a maximum of 16 parameters. Once 16 parameters
have been registered, the drive will start to remove old parameters from the User Parameter list.
Registered parameters can be displayed in [User Parameters] under the main menu.
Note:
In General-Purpose Setup Mode, the drive registers parameters starting from A2-27 since parameters up to A2-26 are already registered
by default.
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
V/f CL-V/f OLV CLV AOLV
The user can select up to 32 parameters for the drive and assign them to
parameters A2-01 through A2-32. Registered parameters can be displayed in
[User Parameters] under the main menu. The user can immediately access
necessary parameters.
V/f CL-V/f OLV CLV AOLV
Determines if the drive automatically saves the history of parameter
changes to A2-17 to A2-32 [User Parameters 17 to 32].
11.2 A: Initialization Parameters
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Default Setting
(Range)
Parameters in
General-Purpose
Setup Mode
(Determined by A1-
07)
Default
(Range)
Determined by A1-06
(0, 1)
11
591