YASKAWA GA700 Technical Manual page 407

No.
Name
(Hex.)
b5-40 Frequency
Reference Monitor
(017F)
@PID
b5-47 PID Output
Reverse Selection
(017D)
2
b5-53 Integrator Ramp
Limit
(0B8F)
RUN
b5-54 PID softstarter
cancel selection
(0BB7)
b5-55 PID feedback
monitor selection
(0BE1)
b5-56 PID feedback
monitor gain
(0BE2)
b5-57 PID Feedback
Monitor Bias
(11DD)
b5-58 PID Setpoints 2
through b5- through 4
60
(1182 -
1184)
RUN
b5-61 PID Trim lower
limit selection
(119A)
b5-62 PID Trim lower
limit
(119B)
b5-63 Differential PID
Feedback Select
(119C)
b5-64 Differential PID
Feedback Gain
(119D)
b5-65 PID Diff Fdbk
Monitor Bias
(119F)
b5-66 PID feedback
monitor Lvl
(11DE)
b5-67 PID Diff Fdbk
monitor Lvl
(11DF)
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
Description
V/f CL-V/f OLV CLV AOLV
Selects the contents displayed in monitor U1-01 [Freq Reference]
when using PID control.
0 : with PID
1 : without PID
V/f CL-V/f OLV CLV AOLV
Sets whether or not the motor should rotate in reverse when the PID
control output is negative.
0 : Disabled: 0 lower limit
1 : Enabled: Negative lower limit
V/f CL-V/f OLV CLV AOLV
Adjusts the responsiveness of PID control when the PID feedback
changes rapidly.
V/f CL-V/f OLV CLV AOLV
Selects the relationship between the soft starter and PID input/
output.
0 : None
1 : Softstarter is canceled
V/f CL-V/f OLV CLV AOLV
Selects the monitor (Ux-xx) used as the PID Feedback.
V/f CL-V/f OLV CLV AOLV
Configures the gain for the monitor selected with b5-55 [PID
feedback monitor selection].
V/f CL-V/f OLV CLV AOLV
Configures the bias for the monitor selected with b5-55 [PID
feedback monitor selection].
V/f CL-V/f OLV CLV AOLV
Configures the PID setpoint selected with H1-xx = 3E or 3F
[Terminal Sx Function Select = PID Setpoint Selection 1/2]. This
parameter is configured on the basis of the maximum output
frequency being the 100% value.
V/f CL-V/f OLV CLV AOLV
Configures the function used to adjust the PID output in proportion
with the frequency reference.
0 : Disabled
1 : Enabled
V/f CL-V/f OLV CLV AOLV
Configures the lower limit of the PID frequency reference trim on
the basis of the maximum output frequency as the 100% value.
V/f CL-V/f OLV CLV AOLV
Selects the monitor (Ux-xx) used as the PID Differential Feedback.
V/f CL-V/f OLV CLV AOLV
Configures the gain of the monitor configured with b5-63
[Differential PID Feedback Select].
V/f CL-V/f OLV CLV AOLV
Configures the bias for the monitor selected with b5-63 [Differential
PID Feedback Select].
V/f CL-V/f OLV CLV AOLV
Configures the signal level for the monitor selected with b5-55 [PID
feedback monitor selection].
0 : Absolute
1 : +-
V/f CL-V/f OLV CLV AOLV
Configures the signal level for the monitor selected with b5-63
[Differential PID Feedback Select].
0 : Absolute
1 : +-
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
10.5 b: Application
Default
Ref.
(Range)
0 629
(0, 1)
1 630
(0, 1)
0.0 Hz 630
(0.0 - 10.0 Hz)
0 630
(0, 1)
000 630
(000 - 999)
1.00 631
(0.00 - 10.00)
0.00 631
(-10.00 - +10.00)
0.00% 631
(0.00 - 100.00%)
0 631
(0, 1)
0.00% 632
(0.00 - 100.00%)
000 632
(000 - 999)
1.00 632
(0.00 - 10.00)
0.00 632
(-10.00 - +10.00)
0 632
(0, 1)
0 633
(0, 1)
407
10