YASKAWA GA700 Technical Manual page 901

0 : OFF
1 : ON
Enables the automatic shut off function. The time at which the LCD backlight automatically turns off is
configured with o1-38 [Time to turn off LCD backlight].
■
o1-38: Time to turn off LCD backlight
No.
Name
(Hex.)
o1-38 Time to turn off LCD
backlight
(11BB)
RUN
If o1-37 = 1 [LCD backlight ON/OFF Selection= ON], after the time configured by o1-38 elapses, the backlight
will automatically turn off.
When any key on the keypad is pressed while the backlight is off, the backlight will temporarily turn back on.
Once the backlight turns back on, the backlight will automatically turn off again after the time configured by o1-
38 elapses.
■
o1-39: Initial Setup Display Selection
No.
Name
(Hex.)
o1-39 Initial setup display
selection
(11BC)
The initial setup screen displays a menu to select the display language, configure the date, time, and other basic
settings. Set the parameter to 0 to cancel the display of this screen every time the power is turned on.
0 : No
When o1-39 = 0, the Home screen appears when the power is turned on.
1 : Yes
If the Run command has been input from before the power is turned on, or if the Run command is turned on while
the initial setup screen appears, the initial setup screen disappears, and the Home screen appears even if o1-39 =
1.
■
o1-40: Home display selection
No.
Name
(Hex.)
o1-40 Home display
selection
(11BD)
RUN
0 : Custom Monitor
1 : Bar Graph
2 : Line Graph / XY Plot
■
o1-41: 1st Monitor Min Setting
No.
Name
(Hex.)
o1-41 1st Monitor Min
Setting
(11C1)
RUN
0 : + - Area ( - o1-42 ~ o1-42 )
1 : + Area ( 0 ~ o1-42 )
2 : - Area ( - o1-42 ~ 0 )
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
V/f CL-V/f OLV CLV AOLV
Configures the time at which the LCD backlight automatically turns off.
V/f CL-V/f OLV CLV AOLV
Selects whether or not to display the LCD keypad initial setup screen every
time the power is turned on. This parameter is only enabled for LED
keypads.
V/f CL-V/f OLV CLV AOLV
Selects the monitor display mode used to display the Home screen. This
parameter is only enabled for LED keypads.
V/f CL-V/f OLV CLV AOLV
Selects the horizontal axis used to display the monitor configured with o1-
24 as a bar graph. This parameter is only enabled for LED keypads.
11.11 o: Keypad-Related Settings
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Default Setting
(Setting Range)
60 s
(10 - 300 s)
Default Setting
(Setting Range)
1
(0, 1)
Default Setting
(Setting Range)
0
(0 - 2)
Default Setting
(Setting Range)
0
(0 - 2)
11
901