YASKAWA GA700 Technical Manual page 748

11.7 F: Options
■
F7-19: EtherNet/IP Torque Scale Factor
No.
Name
(Hex.)
F7-19 EtherNet/IP Torque
Scale Factor
(03F7)
■
F7-20: EtherNet/IP Power Scaling Factor
No.
Name
(Hex.)
F7-20 EtherNet/IP Power
Scaling Factor
(03F8)
■
F7-21: EtherNet/IP Voltage Scale Factor
No.
Name
(Hex.)
F7-21 EtherNet/IP Voltage
Scale Factor
(03F9)
■
F7-22: EtherNet/IP Time Scaling
No.
Name
(Hex.)
F7-22 EtherNet/IP Time
Scaling
(03FA)
■
F7-23 to F7-32: Dynamic Out Assembly 115 Param 1 to 10
No.
Name
(Hex.)
F7-23 Dynamic Out
through F7- Assembly 115 Param
27 1 through 10
(03FB -
03FF)
F7-28
through F7-
32
(0370 - 0374)
■
F7-33 to F7-42: Dynamic In Assembly 165 Param 1 to 10
No.
Name
(Hex.)
F7-33 Dynamic In
through F7- Assembly 165 Param
42 1 through 10
(0375 - 037E)
■
F7-60: PZD1 Write
No.
Name
(Hex.)
F7-60 PZD1 Write
(0780)
748
V/f CL-V/f OLV CLV AOLV
Sets the scaling factor for the torque monitor for the EtherNet/IP object with
the Class ID 2AH.
V/f CL-V/f OLV CLV AOLV
Sets the scaling factor for the power monitor for the EtherNet/IP object with
the Class ID 2AH.
V/f CL-V/f OLV CLV AOLV
Sets the scaling factor for the voltage monitor for the EtherNet/IP object
with the Class ID 2AH.
V/f CL-V/f OLV CLV AOLV
Sets the scaling factor for the time monitor for the EtherNet/IP object with
the Class ID 2AH.
V/f CL-V/f OLV CLV AOLV
Used for setting the Output Assembly 116. The values received from the
Output Assembly 116 are written to the MEMOBUS/Modbus address
register stored for each parameter. When the MEMOBUS/Modbus address
is 0, the values received from the Output Assembly 116 are not written to
the registers.
V/f CL-V/f OLV CLV AOLV
Used for setting the input assembly 166. The values sent to the input
assembly 166 are loaded from the MEMOBUS/Modbus address register
stored for each parameter. When the MEMOBUS/Modbus address is 0, the
value sent to the input assembly 166 is not defined, and so the default
register value for the option card is returned.
V/f CL-V/f OLV CLV AOLV
Sets the MEMOBUS/Modbus address for PZD1 (PPO output). PZD1 (PPO
output) functions as the STW when F7-60 = 0, 1, or 2.
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Default Setting
(Range)
0
(-15 to 15)
Default Setting
(Range)
0
(-15 to 15)
Default Setting
(Range)
0
(-15 to 15)
Default Setting
(Range)
0
(-15 to 15)
Default Setting
(Range)
0
Default Setting
(Range)
0
Default Setting
(Range)
0