Transport; Using The Hanging Brackets To Move The Drive - YASKAWA GA700 Technical Manual

2.4 Transport

2.4

Transport

Follow local laws and regulations when transporting and installing this product.
CAUTION! Crush Hazard. Do not carry the drive by the front cover or terminal cover. Make sure that screws are tightened
properly during transport. The cover of the drive may come off and the drive may fall if it is carried by the front cover or terminal
cover or if screws are loose, which can result in injury.
Drive Weight
< 15 kg (33 lb)
≥ 15 kg (33 lb)
Refer to the Technical Manual for details on using a suspension system, wires, or hanging metal brackets to
transport the drive.
◆

Using the Hanging Brackets to Move the Drive

The hanging brackets attached to the drive are used to temporarily lift the drive during, for example, installation
of the drive to a control panel or wall surface, or replacement of the drive. Do not leave the drive in a state of
vertical or horizontal suspension, or transport the drive over a long distance in such a state. Before installing the
drive, be sure to read the following precautions.
WARNING! Crush Hazard. Use screws to securely affix the drive front cover, terminal blocks, and other drive components prior
to vertical suspension. Failure to comply may result in serious injury or death from falling equipment.
WARNING! Crush Hazard. Do not subject the drive to vibration or impact greater than 1.96 m/s
the cables. Failure to comply may result in serious injury or death from falling equipment.
WARNING! Crush Hazard. Do not attempt to flip the drive over or leave the drive unattended while it is suspended by the wires.
Failure to comply may result in serious injury or death from falling equipment.
32
Number of People Required to Transport
2 + using appropriate lifting equipment
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
1
2 (0.2 G) while it is suspended by