YASKAWA GA700 Technical Manual page 265

6.1 Safety Precautions
WARNING
Crush Hazard
Do not perform work on the drive without eye protection. Wear eye protection before beginning
work on the drive.
Failure to comply could result in serious injury.
Use a dedicated lifter when transporting the drive by a lifter.
Failure to comply could cause death or serious injury from falling equipment.
NOTICE
Observe proper electrostatic discharge (ESD) procedures when handling the drive and circuit
boards.
Failure to comply could cause ESD damage to the drive circuitry.
Never connect or disconnect the motor from the drive while the drive is outputting voltage.
Improper equipment sequencing could damage the drive.
Do not use unshielded wire for control wiring. Use shielded, twisted-pair wires and ground the
shield to the ground terminal of the drive.
Failure to comply could cause electrical interference resulting in poor system performance.
Do not modify the drive circuitry.
Failure to comply could cause damage to the drive and will void warranty. Yaskawa is not responsible for any
modification of the product made by the user.
Confirm that all connections are correct after installing the drive and connecting peripheral
devices.
Failure to comply could damage the drive.
6
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual 265