F7: Communication Option And Ethernet Option - YASKAWA GA700 Technical Manual

No.
Name
(Hex.)
F6-58 DeviceNet Torque
Scaling
(03D9)
F6-59 DeviceNet Power
Scaling
(03DA)
F6-60 DeviceNet Voltage
Scaling
(03DB)
F6-61 DeviceNet Time
Scaling
(03DC)
F6-62 DeviceNet
Heartbeat Interval
(03DD)
F6-63 DeviceNet
Network MAC ID
(03DE)
F6-64 Dynamic Output
through F6- Assembly 109
67 Programmable
Output 1 through 4
(03DF to
03E2)
F6-68 Dynamic Input
through F6- Assembly 159
71 Programmable
Input 1 to 4
(03E3,
03E4, 03C7,
and 03C8)
F6-72 PowerLink Node
Address
(081B)
◆

F7: Communication Option and Ethernet Option

No.
Name
(Hex.)
F7-01 IP Address 1
(03E5)
F7-02 IP Address 2
(03E6)
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
Description
V/f CL-V/f OLV CLV AOLV
Sets the torque scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the power scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the voltage scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the time scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the Heart Beat for DeviceNet communication. A setting of 0
disables the Heart Beat function.
V/f CL-V/f OLV CLV AOLV
This parameter is used to enable confirmation of the currently valid
MAC address for DeviceNet communication via the keypad. This
parameter is used for monitoring only.
V/f CL-V/f OLV CLV AOLV
Sets the Configurable Output 1 through 4 written to the MEMOBUS
register.
V/f CL-V/f OLV CLV AOLV
Sets the Configurable Input 1 through 4 loaded from the
MEMOBUS register.
V/f CL-V/f OLV CLV AOLV
Sets the node ID for PowerLink communication.
Description
V/f CL-V/f OLV CLV AOLV
Sets the IP Address of the device used to connect to the network.
Sets the first octet. The drive must be restarted when the setting is
changed.
Note:
• Set the IP Address using F7-01 through F7-04 [IP Address 4]
when F7-13 = 0 [Address Mode at Startup = Static]. Set IP
Addresses so that they do not overlap on the same network.
• Set F7-01 through F7-12 when F7-13 = 0.
V/f CL-V/f OLV CLV AOLV
Sets the IP Address of the device used to connect to the network.
Sets the second octet. The drive must be restarted when the setting is
changed.
Note:
• Set the IP Address using F7-01 through F7-04 [IP Address 1
through IP Address 4] when F7-13 = 0 [Address Mode at
Startup = Static]. Set the IP Addresses so that they do not
overlap on the same network.
• Set F7-01 through F7-12 when F7-13 = 0.
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
10.9 F: Options
Default
Ref.
(Range)
0 743
(-15 - +15)
0 743
(-15 - +15)
0 743
(-15 - +15)
0 743
(-15 - +15)
0 744
(0 - 10)
0 744
(0 - 63)
0000h 744
(0000h - FFFFh)
0000h 744
(0000h - FFFFh)
0 744
(0 - 255)
Default
Ref.
(Range)
192 744
(0 to 255)
168 744
(0 to 255)
439
10