1.
Press
(Home) to display the HOME screen.
Note:
• [Home] appears in the upper right hand corner of the screen when in HOME mode.
• If [Home] is not displayed for
2.
Press
(Menu).
3.
Press
or
4.
Press
or
5.
Press
or
6.
Press
or
"End" is displayed on the keypad when the write procedure completes successfully.
◆
Verify Keypad Parameters and Drive Parameters
Verifies whether the parameter setting values backed up in the keypad match the parameter setting values in the
drive.
Note:
• Always stop the drive before starting the verification procedure for parameters.
• The drive does not accept Run commands while verifying parameters.
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
, press
(Back), and then press
to select [Parameter Backup], and press
to select the item to be restored, and press
to select [Restore (Keypad → Drive)], and press
to select the parameter data that was stored, and press
3.6 Keypad Operation
to display [Home].
.
.
.
.
3
133