Checking Modified Parameters - YASKAWA GA700 Technical Manual

3.6 Keypad Operation
1.
Press (Home) to display the HOME screen.
Note:
• [Home] appears in the upper right hand corner of the screen when in HOME mode.
• If [Home] is not displayed for
2.
Press (Menu).
3.
Press or
4.
Press or
5.
Press or
6.
Press or
If the parameter setting values backed up in the keypad match the parameter setting values copied to the drive,
"End" is displayed.
Note:
If the parameter setting values backed up in the keypad do not match the parameter setting values copied to the drive, vFyE [VERIFY
ERROR] is displayed. Press any key to return to the screen in Step 6.
◆

Checking Modified Parameters

All parameters changed from their default settings as the result of Auto-Tuning or setting changes will be
displayed. This can be conveniently used to check for changed parameters when replacing a drive. If there are no
parameters that have been changed, "0 Parameters" is displayed. In addition, not only is it possible to check the
parameters that have been changed, but further changes in their setting values can be made as well.
134
, press (Back), and then press
to select [Parameter Backup], and press
to select the item to verify, and press
to select [Verify (Drive ←→ Keypad)], and press
to select the data to verify, and press
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
to display [Home].
.
.
.
.