YASKAWA GA700 Technical Manual page 909

If a drive is replaced, make sure to set o4-07 = 0 and reset the value of U4-06. When the setting of o4-07 is
changed, the recount of U4-06 starts in accordance with the setting of o4-07. Once the configuration is complete,
the setting value of o4-07 automatically resets to 0.
Note:
The maintenance period differs depending on the environment in which the drive is used.
■
o4-09: IGBT Maintenance Setting
No.
Name
(Hex.)
o4-09 IGBT Maintenance
Setting
(0525)
If a drive is replaced, make sure to set o4-09 = 0 and reset the value of U4-07. When the setting of o4-09 is
changed, the recount of U4-07 starts in accordance with the setting of o4-09. Once the configuration is complete,
the setting value of o4-09 automatically resets to 0.
Note:
The maintenance period differs depending on the environment in which the drive is used.
■
o4-11: U2, U3 Initialization
No.
Name
(Hex.)
o4-11 U2, U3 Initialization
(0510)
Note:
The records for U2-xx and U3-xx are not reset even after initializing the drive with A1-03 [Initialize Parameters].
0 : No Reset
Retains the records of Monitors U2-xx and U3-xx.
1 : Reset
Resets the records for Monitors U2-xx and U3-xx. After the reset, the setting value of o4-11 is automatically reset
to 0.
■
o4-12: kWh Monitor Initialization
No.
Name
(Hex.)
o4-12 kWh Monitor
Initialization
(0512)
Note:
The values of U4-10 and U4-11 are not reset even after initializing the drive with A1-03 [Initialize Parameters].
0 : No Reset
Retains the monitor values for U4-10 and U4-11.
1 : Reset
Resets the monitor values for U4-10 and U4-11. After the reset, the setting value of o4-12 is automatically reset to
0.
■
o4-13: NumOfRunCommands Counter Initial
No.
Name
(Hex.)
o4-13 NumOfRunCom
mands Counter Initial Resets the monitor values for U4-02 [Num of Run Commands], U4-24 [No
(0528)
0 : No Reset
Retains the monitor values for U4-02, U4-24, and U4-25.
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
V/f CL-V/f OLV CLV AOLV
U4-07 [IGBT Maintenance] monitor values can be overwritten.
V/f CL-V/f OLV CLV AOLV
Resets the records of Monitors U2-xx [Fault Trace] and U3-xx [Fault
History].
V/f CL-V/f OLV CLV AOLV
Resets the monitor values for U4-10 [kWh, Lower 4 Digits] and U4-11
[kWh, Upper 5 Digits].
V/f CL-V/f OLV CLV AOLV
of Travels(L)], and U4-25 [No of Travels(H)].
11.11 o: Keypad-Related Settings
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Default Setting
(Setting Range)
0%
(0 - 150%)
Default Setting
(Setting Range)
0
(0, 1)
Default Setting
(Setting Range)
0
(0, 1)
Default Setting
(Setting Range)
0
(0, 1)
11
909