Display Monitor As Bar Graph - YASKAWA GA700 Technical Manual

3.6 Keypad Operation
2.
Press (Menu).
3.
Press or
4.
Press or
5.
Press or
6.
Press .
7.
Press or
When the U Parameters have been expressed as Ux-xx make settings for the "x-xx" portion. For example,
if you want to monitor U1-01 [Freq Reference], make a setting of "101," as shown in the following.
This completes the settings procedure.
◆

Display Monitor as Bar Graph

The following explains how to display a specified monitor as a bar graph. Up to three can be displayed.
126
to select [Display Monitor], and press
to select [Display Bar Graph], and press
to select the location to store the monitor, and press
to select the monitor number to register, and press
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
.
(Setup).
.
.