YASKAWA GA700 Technical Manual page 905

■
o2-06: Ope Select @Keypad is Disconnect
No.
Name
(Hex.)
o2-06 Ope Select @Keypad
is Disconnect
(050A)
This parameter operates even when the keypad installed to the drive becomes disconnected. This parameter is
enabled in the following circumstances.
• When b1-02 = 0 [Run Command Selection 1 = Keypad] or b1-16 = 0 [Run Command Selection 2 = Keypad]
• Using Local mode
0 : Disabled
The drive continues to operate even when a keypad disconnection is detected.
1 : Enabled
Once a keypad disconnection is detected, the drive stops operating and the oPr [Keypad Connection Fault]
indicator appears. The motor coasts to stop.
■
o2-07: MotorDirect@PowUpWhenUsingKeypad
No.
Name
(Hex.)
o2-07 MotorDirect@Po
wUpWhenUsingKey
(0527)
pad
This parameter is enabled in the following circumstances.
• When b1-02 = 0 [Run Command Selection 1 = Keypad] or b1-16 = 0 [Run Command Selection 2 = Keypad]
• Using local mode
0 : Forward
1 : Reverse
■
o2-09: Reserved
No.
Name
(Hex.)
o2-09 Factory use
(050D)
■
o2-23: Lost Detection of Ext. Power 24V
No.
Name
(Hex.)
o2-23 Lost Detection of
Ext. Power 24V
(11F8)
Note:
The drive cannot run when operating via a single 24-V external power supply.
0 : Disabled
The loss of the 24-V external power supply is not detected.
1 : Enabled
The L24v [Ext. 24-V Power Supply Lost] indicator appears when the loss of the 24-V external power supply is
detected.
Note:
The minor fault signal is not output from the terminal assigned the configuration of H2-xx = 10 [Multi-Function Digital Out = Minor
Fault].
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
V/f CL-V/f OLV CLV AOLV
Selects whether or not to stop the drive when the keypad connection cable is
disconnected from the drive or damaged while the keypad is the Run
command source.
V/f CL-V/f OLV CLV AOLV
Selects the direction of motor rotation when the power is turned on when
the keypad is the Run command source.
-
V/f CL-V/f OLV CLV AOLV
Selects whether or not to provide warning when the backup external 24-V
power supply turns off while the main circuit power supply is supplied.
11.11 o: Keypad-Related Settings
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Default Setting
(Setting Range)
0
(0, 1)
Default Setting
(Setting Range)
0
(0, 1)
Default Setting
(Setting Range)
-
Default Setting
(Setting Range)
0
(0, 1)
11
905