YASKAWA GA700 Technical Manual page 43

3.
While pressing on the hook located on the side of the front cover, pull the front cover forward to remove it
from the drive.
■
Reattach the Front Cover
Wire the drive and other peripheral devices before reattaching the front cover.
Note:
• Wire the grounding terminals, main circuit terminals, and control circuit terminals, in that order.
• Do not pinch wires or signal lines between front cover and the drive when replacing the cover.
• Tighten the screws to a tightening torque of 0.98 to 1.33 N∙m (8.67 to 11.77 lb.∙in.).
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
Figure 2.20 Remove the Front Cover
Figure 2.21 Reattach the Front Cover
2.8 Removing/Reattaching the Cover
2
43