3.
Press
or
4.
Press
or
5.
Press
or
This completes the procedure for selecting the language.
◆
Set the Date and Time
The following explains how to set the date and time.
Note:
• Refer to "Replace the Keypad's Battery" for details on the battery installation procedure.
After installing the battery, set o4-24 = 1 [bAT Detection selection = Enable].
• If the clock-use battery has not been installed in the keypad, the date and time will need to be set when the drive is energized again
after it was de-energized.
1.
Press
(Home) to display the HOME screen.
Note:
• [Home] appears in the upper right hand corner of the screen when in HOME mode.
• If [Home] is not displayed for
2.
Press
(Menu).
3.
Press
or
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
to select [Initial Settings], and press
to select [Language Selection], and press
to select the language, and press
, press
(Back), and then press
to select [Initial Settings], and press
3.6 Keypad Operation
.
.
.
to display [Home].
.
3
141