YASKAWA GA700 Technical Manual page 747

Note:
• The following setting values are available when using the PROFINET communication option card (SI-EP3).
0: Static
2: DCP
• Parameters F7-01 to F7-12 [IP Address 1 = Gateway Address 4] must be configured when F7-13 = 0. Set an IP Addresses that is
unique.
■
F7-14: Duplex Mode Selection
No.
Name
(Hex.)
F7-14 Duplex Mode
Selection
(03F2)
0 : Auto/Auto
1 : Half/Half
2 : Full/Full
■
F7-15: Communication Speed Selection
No.
Name
(Hex.)
F7-15 Communication
Speed Selection
(03F3)
10 : 10/10 Mbps
102 : 100/100 Mbps
Note:
Set F7-15 when F7-14 = 0 or 2 [Duplex Mode Selection = Auto/Auto or Full/Full].
■
F7-16: Timeout Value
No.
Name
(Hex.)
F7-16 Timeout Value
(03F4)
Note:
A value of 0 disables the connection time out.
■
F7-17: EtherNet/IP Speed Scaling Factor
No.
Name
(Hex.)
F7-17 EtherNet/IP Speed
Scaling Factor
(03F5)
■
F7-18: EtherNet/IP Current Scale Factor
No.
Name
(Hex.)
F7-18 EtherNet/IP Current
Scale Factor
(03F6)
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
V/f CL-V/f OLV CLV AOLV
Selects the setting method for the duplex mode.
V/f CL-V/f OLV CLV AOLV
Sets the communications speed.
V/f CL-V/f OLV CLV AOLV
Sets the detection time of the timeout value for communications in
increments of 0.1 s.
V/f CL-V/f OLV CLV AOLV
Sets the scaling factor for the speed monitor for the EtherNet/IP object with
the Class ID 2AH.
V/f CL-V/f OLV CLV AOLV
Sets the scaling factor for the output current monitor for the EtherNet/IP
object with the Class ID 2AH.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
11.7 F: Options
Default Setting
(Range)
1
(0 - 8)
Default Setting
(Range)
10
(10, 102)
Default Setting
(Range)
0.0 s
(0.0 to 30.0 s)
Default Setting
(Range)
0
(-15 to 15)
Default Setting
(Range)
0
(-15 to 15)
11
747