Set Data To Log - YASKAWA GA700 Technical Manual

3.6 Keypad Operation
6.
Press or
• [Yes]: Data logging starts.
• [No]: No data logging. If the data logging function is already being used, it is stopped.
◆

Set Data to Log

■
Set Monitor to Log
The following explains how to set the monitor for which data is to be logged.
1.
Press (Home) to display the HOME screen.
Note:
• [Home] appears in the upper right hand corner of the screen when in HOME mode.
• If [Home] is not displayed for
2.
Press (Menu).
3.
Press or
4.
Press or
5.
Press or
146
to select [Yes] or [No], and press
, press (Back), and then press
to select [Tools], and press
to select [Data Log], and press
to select [Data Log Permit], and press
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
.
to display [Home].
.
(Setup).
.