European Standards; Ce Low Voltage Directive Compliance - YASKAWA GA700 Technical Manual

4.2 European Standards

4.2

European Standards

The CE Mark indicates that the product meets environmental and safety standards in the European Union.
Products manufactured, sold, or imported within the European Union are required to display the CE Mark.
European Union standards include standards for electrical appliances (Low Voltage Directive), standards for
electrical noise (EMC Directive), and standards for machinery (Machinery Directive).
This product displays the CE Mark in accordance with the Low Voltage Directive, the EMC Directive, and the
Machinery Directive.
Contact Yaskawa or your nearest sales representative for details on models 2138 to 2415, 4089 to 4675.
European Directive
Low Voltage Directive
2014/35/EU
EMC Guidelines Compliance
2014/30/EU
Machinery Directive
2006/42/EC
*1 Approval pending for models 2138 to 2415, 4089 to 4675.
Note:
Indicates that the device or machine containing this product is covered by the CE Mark.
The customer is responsible for displaying the CE Mark on the final device containing this product. Customers must verify themselves
that the final device is compliant with EU standards.
◆

CE Low Voltage Directive Compliance

It has been confirmed that this product complies with the CE Low Voltage Directive by conducting a test
according to IEC/EN 61800-5-1:2007.
The following conditions must be satisfied for machines and devices incorporating this product to comply with
the CE Low Voltage Directive.
■
Area of Use
Install this product in a location with overvoltage category III and pollution degree 2 or less which are defined by
IEC/EN 60664.
■
Guarding against Debris
When installing IP20 enclosure drives (model: 2xxxxB, 4xxxxB), use an enclosure that prevents foreign material
from entering the drive from above or below.
■
Wiring Diagram
Figure 4.2 shows an example of a drive that is wired for compliance with the CE Low Voltage Directive.
180
Figure 4.1 CE Mark
Table 4.1 Harmonized Standard
IEC/EN 61800-5-1:2007
EN 61800-3:2004+A1:2012
• EN ISO 13849-1/AC:2009 (PL e (Cat.III))
• IEC 62061/A1:2012 (SIL CL 3)
• EN 62061/A1:2013 (SIL CL 3)
• IEC/EN 61800-5-2:2007 (SIL3)
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
Harmonized Standard
*1