YASKAWA GA700 Technical Manual page 812

11.8 H: Terminal Functions
■
12: Regenerative Torque Limit
Setting Function
12 Regenerative Torque
Limit
Note:
The lower torque limit is enabled when using both L7-01 through L7-04 and analog inputs to set torque limits for the same quadrant.
■
13: Torque Reference / Torque Limit
Setting Function
13 Torque Reference /
Torque Limit
Note:
The lower torque limit is enabled when using both L7-01 through L7-04 and analog inputs to set torque limits for the same quadrant.
■
14: Torque Compensation
Setting Function
14 Torque
Compensation
■
15: General Torque Limit
Setting Function
15 General Torque Limit
■
16: Differential PID Feedback
Setting Function
16 Differential PID
Feedback
Calculates the PID input from the deviation between the PID feedback and the differential feedback value signals.
■
1F: Through Mode
Setting Function
1F Through Mode
If a terminal not used is set to 1F, the signal input to the terminal can be used as PLC analog signal input via
MEMOBUS/Modbus communications or the communication option. This input signal does not affect drive
operation. This functions the same as F (Through Mode).
■
30: DriveWorksEZ analog input 1
Setting Function
30 DriveWorksEZ
analog input 1
■
31: DriveWorksEZ analog input 2
Setting Function
31 DriveWorksEZ
analog input 2
812
V/f CL-V/f OLV CLV AOLV
Inputs the regenerative torque limit assuming that the motor rated torque is 100%.
V/f CL-V/f OLV CLV AOLV
Inputs the torque reference assuming that the motor rated torque is 100%. This parameter operates
as the torque limit for speed control.
V/f CL-V/f OLV CLV AOLV
Inputs the torque compensation value assuming that the motor rated torque is 100%.
V/f CL-V/f OLV CLV AOLV
Inputs the torque limit common to all quadrants for forward, reverse, and regenerative operation
assuming that the motor rated torque is 100%.
V/f CL-V/f OLV CLV AOLV
Inputs the PID differential feedback value assuming that the full scale analog signal (10 V or 20
mA) is 100%.
V/f CL-V/f OLV CLV AOLV
Use this setting when terminals are not used or to use terminals in through mode.
V/f CL-V/f OLV CLV AOLV
Used with DriveWorksEZ. Refer to the DriveWorksEZ Online Manual for more information.
V/f CL-V/f OLV CLV AOLV
Used with DriveWorksEZ. Refer to the DriveWorksEZ Online Manual for more information.
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV