B6: Dwell Function - YASKAWA GA700 Technical Manual

10.5 b: Application
No.
Name
(Hex.)
b5-89 Sleep Method
Selection
(0B89)
RUN
b5-90 EZ Sleep Unit
(0B90)
b5-91 EZ Minimum
Speed
(0B91)
RUN
b5-92 EZ Sleep Level
(0B92)
RUN
b5-93 EZ Sleep Time
(0B93)
RUN
b5-94 EZ Wake-up Level
(0B94)
RUN
b5-95 EZ Wake-up Mode
(0B95)
b5-96 EZ Wake-up Time
(0B96)
◆

b6: Dwell Function

No.
Name
(Hex.)
b6-01 Dwell Reference at
Start
(01B6)
b6-02 Dwell Time at Start
(01B7)
b6-03 Dwell Reference at
Stop
(01B8)
b6-04 Dwell Time at Stop
(01B9)
408
Description
V/f CL-V/f OLV CLV AOLV
Configures the sleep and start operations modes when using the PID
function.
0 : Standard
1 : EZ Sleep/Wake-up
V/f CL-V/f OLV CLV AOLV
Configures the unit of measure for b5-91 [EZ Minimum Speed] and
b5-92 [EZ Sleep Level].
0 : 0.1Hz units
1 : rev/min
V/f CL-V/f OLV CLV AOLV
Configures the minimum speed for the EZ Sleep/Wake-up function.
The larger value between b5-91, b5-34 [PID Output Lower Limit],
and d2-02 [Frequency Reference Lower Limit] is used internally to
configure this parameter.
V/f CL-V/f OLV CLV AOLV
The drive enters the sleep state when the output frequency or motor
speed drops below the value of b5-92 for a time longer than the
setting value of b5-93 [EZ Sleep Time].
V/f CL-V/f OLV CLV AOLV
The drive enters the sleep state when the output frequency or motor
speed drops below the value of b5-92 [EZ Sleep Level] for a time
longer than the setting value of b5-93.
V/f CL-V/f OLV CLV AOLV
Configures the level at which the drive resumes operation from the
Sleep mode.
V/f CL-V/f OLV CLV AOLV
Selects the wake-up mode used when resuming operation from the
Sleep mode.
0 : Absolute
1 : Setpoint Delta
V/f CL-V/f OLV CLV AOLV
Configures the EZ Wake-up time.
Description
V/f CL-V/f OLV CLV AOLV
Sets the output frequency to briefly maintain when starting the
motor.
V/f CL-V/f OLV CLV AOLV
Sets the time for the drive to hold the output frequency when
starting the motor.
V/f CL-V/f OLV CLV AOLV
Sets the output frequency to briefly maintain when ramping to stop.
V/f CL-V/f OLV CLV AOLV
Sets the time for the drive to hold the output frequency when
ramping to stop.
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Default
Ref.
(Range)
0 633
(0, 1)
0 633
(0, 1)
0.0 Hz or 0 min -1
633
(r/min)
(0.0 to 590.0 Hz or
0 to 35400 min -1 (r/
min))
-1
0.0 Hz or 0 min 633
(r/min)
(0.0 to 590.0 Hz or
-1
0 to 35400 min (r/
min))
5.0 s 634
(0.0 - 1000.0 s)
0.00% 634
(0.00 - 600.00%)
0 634
(0, 1)
1.0 s 634
(0.0 - 1000.0 s)
Default
Ref.
(Range)
0.0 635
(Determined by
A1-02)
0.0 s 635
(0.0 - 10.0 s)
0.0 635
(Determined by
A1-02)
0.0 s 635
(0.0 - 10.0 s)