Start-Up Procedures; Flowchart A (Connect Motor And Run It With Minimal Setting Changes) - YASKAWA GA700 Technical Manual

3.4

Start-up Procedures

The basic steps required to start up the drive are explained in the following. Use the flowcharts to determine the
most appropriate start-up method for a given application. Note that only the most basic settings are introduced
here.
Note:
Refer to the section of A1-06 to set up the drive using one of the Application Presets.
◆

Flowchart A (Connect Motor and Run It With Minimal Setting Changes)

Flowchart A describes a basic start-up sequence to connect a motor and get it running with a minimal amount of
setting changes. Settings can slightly vary depending on the application. Use the drive default parameter settings
in simple applications that do not require high precision.
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
Figure 3.8 Basic Steps before Startup

3.4 Start-up Procedures

115
3