YASKAWA GA700 Technical Manual page 181

*1 Use terminals -, +1, +2, B1, and B2 to connect options to the drive. Never connect power supply lines to
these terminals.
*2 For circuit protection, the main circuit is separated from the surface case that would otherwise come into
contact with the main circuit.
*3 The control circuit is a Safety Extra-Low Voltage circuit, and therefore the control circuit must be separated
from other circuits by reinforced insulation. Ensure that the Safety Extra-Low Voltage circuit is connected as
required.
YASKAWA ELECTRIC SIEP C710617 01B YASKAWA AC Drive GA700 Technical Manual
Figure 4.2 Wiring Diagram for Low Voltage Directive Compliance
4.2 European Standards
181
4