Oil And Water Prevention Measures For The Servo Motor - Delta ASDA-A3 Series User Manual

ASDA-A3

2.4.5 Oil and water prevention measures for the servo motor

Follow these precautions and do not allow water, oil, or other foreign objects to enter the servo
motor.
 Do not submerge the cable in oil or water.
 If oil or water is unavoidable, use oil-resistant cables. Delta does not provide oil-resistant
cables.
 If the servo motor must be mounted with the shaft end up, do not use it in a machine,
gearbox, or other environment where the servo motor may have contact with oil or water.
 Do not use the servo motor in an environment with cutting fluids. Depending on the type of
cutting fluids, sealing materials, coated colloids, cables, or other components may be
affected or even deteriorated.
 Do not continuously expose the servo motor to oil mist, water vapor, oil, water, or grease.
If you cannot avoid using the servo motor under the above conditions, take prevention
measures to avoid dirt and water from entering the machine.
(1) Servo motor; (2) Oil
(1) Gear; (2) Oil
Installation
2
2-15