Delta ASDA-A3 Series User Manual page 604

ASDA-A3
P0.009★■
Default: -
Unit: -
Format: DEC
Settings:
Set the value to be monitored in P0.017 through the drive panel or communication. Please refer to
P0.002. The communication port reads the communication address to get the status.
For example, if you set P0.017 to 3 to access P0.009, the panel displays the total number of feedback
pulses of the motor encoder. If accessing the data through Modbus communication, it reads two 16-bit
values (0012H and 0013H) as a single 32-bit value. (0013H : 0012H) = (High word : Low word). Set
P0.002 to 23 and the panel displays "VAR-1" and then the value of P0.009.
P0.010★■
Default: -
Unit: -
Format: DEC
Settings:
Set the value to be monitored in P0.018 through the drive panel or communication. Please refer to
P0.002. To get the status, read the communication address through the communication port. Set P0.002
to 24 and the panel displays "VAR-2" and then the value of P0.010.
P0.011★■
Default: -
Unit: -
Format: DEC
Settings:
Set the value to be monitored in P0.019 through the drive panel or communication. Please refer to
P0.002. To get the status, read the communication address through the communication port. Set P0.002
to 25 and the panel displays "VAR-3" and then the value of P0.011.
Status monitoring register 1
Status monitoring register 2
Status monitoring register 3
Control mode: All
Setting range: -
Data size: 32-bit
Control mode: All
Setting range: -
Data size: 32-bit
Control mode: All
Setting range: -
Data size: 32-bit
Parameters
Address: 0012H
0013H
Address: 0014H
0015H
Address: 0016H
0017H
8
8-27