Delta ASDA-A3 Series User Manual page 672

ASDA-A3
P2.008■
Default: 0
Unit: -
Format: DEC
Settings:
Special parameter write-in function:
Setting value
10
18
20
22
30, 35
406
400
P2.009
Default: 2
Unit: ms
Format: DEC
Settings:
When environmental interference is high, increasing this value can enhance the control stability. If you
set the value too high, it affects the response time.
P2.010
0x0101 (A3-L, A3-M)
Default:
0x0100 (A3-F, A3-E)
Unit: -
Format: HEX
Settings:
U Z YX
YX Input function selection
- -

YX: input function selection
Refer to Table 8.1.
Special parameter write-in function
Reset parameter groups P0 - P7 (cycle the power after reset).
Reset parameter group PM (cycle the power after reset).
P4.010 is writable.
P4.011 - P4.021 are writable.
Save Compare, Capture, and E-Cam data.
Enable forced DO mode.
When forced DO mode is enabled, switch back to the normal DO mode.
DI response filter time
DI1 functional planning
Control mode: All
Setting range: 0 to 501
Data size: 16-bit
Function
Control mode: All
Setting range: 0 to 100
Data size: 16-bit
Control mode: All
0x0000 - 0x015F (last two codes
Setting range:
are DI codes)
Data size: 16-bit
Z Input contact: A or B contact
U Reserved
Parameters
Address: 0210H
0211H
Address: 0212H
0213H
Address: 0214H
0215H
8
8-95