Delta ASDA-A3 Series User Manual page 741

Parameters
P5.009
Default: -2147483648
8
Format: DEC
Settings:
In PR mode, if the motor moves in the negative direction and its feedback position exceeds the value of
P5.009, AL285 occurs.
P5.010★■
Default: -
Format: DEC
Settings:
The total data size is N x 32 bits, where N indicates the number of data sets returned to the data array.
P5.011■
Default: 0
Format: DEC
Settings:
Specify the address to read or write the data array. Refer to Chapter 7 for detailed instructions.
P5.012■
Default: 0
Format: DEC
Settings:
Window #1: when read with the panel, the value set by P5.011 does not add 1, but when read or written
by other methods, it adds 1.
Refer to Section 7.2.1 Data array for detailed instructions.
8-164
Negative software limit
Unit: PUU
Data array: data size
Unit: -
Data array: address for reading and writing
Unit: -
Data array: window #1 for reading and writing
Unit: -
Control mode: PR
Setting range: -2147483648 to +2147483647
Data size: 32-bit
Control mode: All
Setting range: Read-only
Data size: 16-bit
Control mode: All
Setting range: 0 to (value set by P5.010 minus 1)
Data size: 16-bit
Control mode: All
Setting range: -2147483648 to +2147483647
Data size: 32-bit
ASDA-A3
Address: 0512H
0513H
Address: 0514H
0515H
Address: 0516H
0517H
Address: 0518H
0519H