Delta ASDA-A3 Series User Manual page 601

Parameters
Parameter
No.
8
PM.051▲
PM.053▲
(★) Read-only parameter. Can only read the value of the parameter. For example, P0.000, P0.010, and
P4.001.
(▲) Parameter cannot be changed when servo is in Servo On status. For example, P1.000 and P1.046.
( ● )
Parameter changes become valid after power cycling. For example, P1.001 and P3.000.
( ■ ) Parameter resets to its default value after power cycling. For example, P3.006.
8-24
Function
Linear motor phase inductance
Linear motor back electromotive
force constant
Default value Unit
- mH
(panel / (panel /
software) software)
- 0.01 mH
(communication) (communication)
- Vrms/(m/s)
(panel / (panel /
software) software)
- 0.1 Vrms/(m/s)
(communication) (communication)
ASDA-A3
Applicable motor
Linear Rotary
-
motor motor
O - -
O - -