Delta ASDA-A3 Series User Manual page 683

Parameters
P2.037
Default: 0x0100
8
Format: HEX
Settings:
Refer to the description of P2.010. If there is no physical pin for DI10 on the model, use DI10 as a virtual
digital input when the number of physical DI points is insufficient or a trigger through communication.
You can set the DI to be used as soon as the servo power is on (e.g. Servo On) to be a virtual DI and
normally closed.
P2.038
Default: 0x0100
Format: HEX
Settings:
Refer to the description of P2.010. If there is no physical pin for DI11 on the model, use DI11 as a virtual
digital input when the number of physical DI points is insufficient or a trigger through communication.
You can set the DI to be used as soon as the servo power is on (e.g. Servo On) to be a virtual DI and
normally closed.
P2.039
Default: 0x0100
Format: HEX
Settings:
Refer to the description of P2.010. If there is no physical pin for DI12 on the model, use DI12 as a virtual
digital input when the number of physical DI points is insufficient or a trigger through communication.
You can set the DI to be used as soon as the servo power is on (e.g. Servo On) to be a virtual DI and
normally closed.
8-106
DI10 functional planning
Unit: -
DI11 functional planning
Unit: -
DI12 functional planning
Unit: -
Control mode: All
0x0000 - 0x015F (last two codes
Setting range:
are DI codes)
Data size: 16-bit
Control mode: All
Setting range: 0x0000 - 0x015F (last two codes
are DI codes)
Data size: 16-bit
Control mode: All
0x0000 - 0x015F (last two codes
Setting range:
are DI codes)
Data size: 16-bit
ASDA-A3
Address: 024AH
024BH
Address: 024CH
024DH
Address: 024EH
024FH