Delta ASDA-A3 Series User Manual page 932

ASDA-A3 Linear Motor and Third-Party Motor
Step 2: Set Motor Parameters
11
Parameter source: Delta C3 pulse type rotary motors and third-party communication type
motors only support "Manual Setting". Delta communication type motors do not require the
identification.
PM.022 Motor temperature sensor: if the third-party motor is equipped with a temperature
sensor, select the type of the temperature sensor and then set PM.024 (Motor temperature
.
sensor resistance)
Rotary Motor Parameters: input all motor specifications manually. Correctly set the motor current
parameters (PM.029 and PM.030), or the motor may be burnt. Be sure to double check the
parameter settings and whether the unit is Ampere RMS or Ampere Peak.
When the settings are complete, click Write and then click Next.
Note: the grayed-out fields are read-only and cannot be edited.
11-23