Delta ASDA-A3 Series User Manual page 732

ASDA-A3
P4.014
Default: Factory setting
Unit: -
Format: DEC
Settings:
Manually calibrate the hardware offset. The function must be enabled by setting P2.008. Do not change
the auxiliary calibration as this parameter cannot be reset.
P4.015
Default: Factory setting
Unit: -
Format: DEC
Settings:
Manually calibrate the hardware offset. The function must be enabled by setting P2.008. Do not change
the auxiliary calibration as this parameter cannot be reset.
P4.016
Default: Factory setting
Unit: -
Format: DEC
Settings:
Manually calibrate the hardware offset. The function must be enabled by setting P2.008. Do not change
the auxiliary calibration as this parameter cannot be reset.
P4.017
Default: Factory setting
Unit: -
Format: DEC
Settings:
Manually calibrate the hardware offset. The function must be enabled by setting P2.008. Do not change
the auxiliary calibration as this parameter cannot be reset.
Analog torque input 2 - hardware offset calibration
Current detector (V1 phase) - hardware offset calibration
Current detector (V2 phase) - hardware offset calibration
Current detector (W1 phase) - hardware offset calibration
Control mode: All
Setting range: 13926 to 18842
Data size: 16-bit
Control mode: All
Setting range: 13926 to 18842
Data size: 16-bit
Control mode: All
Setting range: 13926 to 18842
Data size: 16-bit
Control mode: All
Setting range: 13926 to 18842
Data size: 16-bit
Parameters
Address: 041CH
041DH
Address: 041EH
041FH
Address: 0420H
0421H
Address: 0422H
0423H
8
8-155