Delta ASDA-A3 Series User Manual page 494

ASDA-A3
is effective immediately). Do not modify P5.088 during cutting, or the machine might be
damaged.
If you set P5.088.X Bit 2 to 0 to have the modified E-Cam curve scaling take effect upon the
next engagement, then the cutting length changes upon the next clutch engagement. For details
about flying shear applications, refer to Section 7.3.8.
Slave axis
position
(PUU)
Slave axis
position
(PUU)
Master axis
position
(Pulse)
P5.019 = 1
Master axis
position
(Pulse)
P5.019 = 0.5
Figure 7.3.3.3 E-Cam curve scaling
Slave axis
position
(PUU)
P5.019 = 2
Slave axis
position
(PUU)
P5.019 = -1
Motion Control
Master axis
position
(Pulse)
Master axis
position
(Pulse)
7-91
7