Delta ASDA-A3 Series User Manual page 925

Linear Motor and Third-Party Motor
Step 2: Set Motor Parameters
11
Parameter source: there are two options. For "Database", you only need to confirm the Delta
linear motor model and the software automatically fills in the motor specifications according to
the content in the database. For "Manual Setting", input all linear motor specifications manually.
PM.022 Motor temperature sensor: if the third-party motor is equipped with a temperature
sensor, select the type of the temperature sensor and then set PM.024 (Motor temperature
sensor resistance).
Linear Motor Parameters: correctly set the motor current parameters (PM.046 and PM.047),
or the motor may be burnt. Be sure to double check the parameter settings and whether the unit
is Ampere RMS or Ampere Peak.
When the settings are complete, click Write and then click Next.
Note: the grayed-out fields are read-only and cannot be edited.
11-16
ASDA-A3