ASDA-A3
Motion Control
Speed compensation (V
): in some rotary shear applications, the speeds of the master and
7.
c
cutter axes are different during cutting; so you can use speed compensation to change the
speed of the cutter axis. In the cutting zone, if the speed compensation value is positive,
the cutter axis speed is faster than the master axis; if the speed compensation value is
7
negative, the cutter axis speed is slower than the master axis.
Figure 7.3.7.9 ASDA-Soft setting interface for [Rotary Shear - W/O Sync. Zone]
7-109