Motor Parameter Identification For Rotary Motors - Delta ASDA-A3 Series User Manual

Linear Motor and Third-Party Motor

11.3.1.2 Motor parameter identification for rotary motors

As shown in the following figure, there are four steps in the motor parameter identification
procedure for the rotary motors, "Select Motor Type", "Set Motor Parameters", "Set Feedback
11
Signal", and "Start Motor Identification". You can complete the setting by following the four steps.
The details are as follows.
Step 1: Select Motor Type
Start the Motor Parameter Identification Wizard and select "Rotary Motor".
11-22
ASDA-A3